The MixDeck Package


Add to wishlist
Categories: , ,

Numark MixDeck Specs:

  • Complete system with CD/MP3/USB decks, mixer, computer audio and MIDI interface, and Universal Dock for iPod
  • Play from CDs, MP3 CDs, USB flash drives, iPod, computers, and external inputs
  • Record your set to iPod and listen later
  • Mixer with EQ/rotary kills, replaceable crossfader, and complete controls for iPod
  • Serato DJ Intro software included
  • Pre-mapped for Traktor Pro 2 and Virtual DJ Pro
  • USB computer interface for software control and audio streaming
  • Inputs: Mic (1/4″), two Aux (RCA stereo pairs), iPod dock, Computer (USB, stereo)
  • Outputs (all stereo): Main (balanced XLR & RCA), Booth (RCA), Record (RCA), Deck 1
  • (RCA), Deck 2 (RCA), Cue (1/8” & 1/4”)
  • Beat-synced DSP effects with wet-dry fader: chop, echo, filter, flanger, pan, phaser
  • Smooth, fast, slot-loading drives with large, touch-sensitive illuminated platters
  • Control MIDI software, with no timecode needed, via USB
  • CD direct outputs for use with timecode interfaces
  • Adjustable start and stop time for vinyl-like deck performance
  • Automatic BPM analyzer and Tap tempo for manual BPM entry
  • Slide BPM ±6, 12, 25, and 100% or bend with pitch buttons
  • Key Lock holds pitch while you independently manipulate its BPM
  • Seamless looping, sampling, and easily accessible hot cues
  • Keep time moving forward while you cut or reverse the track using Bleep/Reverse
  • Single-track, continuous, and programmable playback
  • Fader Start plays the cued track when you move the crossfader
  • Two large, backlit displays for BPM, CD/MP3 text tags, and folder navigation


  • MIXDECK universal DJ system
  • Serato DJ Intro software
  • USB cable
  • Audio driver CD
  • Power supply
  • Quickstart guide

Mackie Thump TH-15A

  • Acoustic Performance
  • Frequency Range (—10 dB): 40Hz—20kHz
  • Frequency Response (—3 dB): 50Hz—18.5kHz
  • Horizontal Coverage Angle: 90°
  • Vertical Coverage Angle: 60°
  • Maximum SPL Long-Term: 113dB SPL @ 1m
  • Maximum SPL Peak: 116dB SPL @ 1m
  • Input/Output
  • Input Type: Female XLR Balanced/Unbalanced
  • Input Impedance: 20 kOhms balanced bridging, 10 kOhms unbalanced
  • Loop-through: Male XLR Balanced/Unbalanced (parallel with input)
  • Level Control: Rotating knob, 0dB at center
  • Sensitivity: +4dBu for full output (Level Control @ Center), —36dBu for full output (Level Control @ Max)
  • Power Amplifiers
  • Low Frequency Power Amplifier:
  • Rated Power: 150W, 8 Ohm load, 300W peak
  • THD: <0.1%
  • Signal-to-Noise Ratio: > —94 dB, 20Hz to 20kHz, unweighted, referenced to 138W into 8 Ohms
  • Design: BTL Class D
  • High Frequency Power Amplifier:
  • Rated Power: 50W, 4 Ohm load, 100W peak
  • THD: <0.1 %
  • Signal-to-Noise Ratio: > —97dB, 20Hz to 20kHz, unweighted, referenced to 50W into 4 Ohms
  • Design: Class AB
  • Electronic Crossover
  • Crossover Type: 24dB/octave
  • Crossover Frequency: 3kHz
  • Equalization
  • Low Frequency EQ: ±15dB @ 80Hz, shelving
  • Mid Frequency EQ: ±15dB, bandpass, sweepable from 100Hz to 8kHz
  • High Frequency EQ: ±15dB @ 12kHz, shelving
  • Direct/EQ Switch: Bypasses EQ section
  • Protection Features
  • Over-excursion Protection: Second-order sub-sonic filter
  • Thermal Protection: Independent amplifier shutdown, auto reset
  • Driver Protection: Independent HF and LF compressors
  • AC Power Requirements
  • US: 120 VAC, 60Hz
  • AC Connector: 3-pin IEC 250 VAC, 20 A male
  • Fuse: 115 VAC: T 6.3 AL/250V, 230 VAC: T 3.15 AL/250V
  • Power Consumption: 320W with music, loud mix, 20W quiescent (idle)
  • Construction Features
  • Basic Design: Asymmetrical Trapezoidal
  • Basic Design: Asymmetrical Trapezoidal
  • Material: Polypropylene
  • Finish: Textured
  • Handles: One on each side, one on top
  • Grille: Perforated metal with weather-resistant coating
  • Display LEDs:
  • Front: Power ON
  • Rear: Power ON, OL (overload)



There are no reviews yet.

Be the first to review “The MixDeck Package”